200-301 practice question on Management access, 2026-11-10
Archived question for 2026-11-10. Domain: IP Services. Objective 4.10: Management access. Original SecLern question, written for practice.
The vty lines of Edge5, a Cisco router, are set with transport input ssh and login local, and the line password Vty-Pass-9 is configured. No username command exists. A technician's SSH session starts and asks for a username, but every login is rejected. Why?
Show the explanation
The prompt for a username shows SSH is working. login local then checks the local database, which has no accounts, so every attempt fails regardless of the line password.
Each option
- A. The line password is not used with login local. It would be right with plain login on the line.
- B (correct). Correct: With login local the line password is ignored and the router searches a local username database that is empty.
- C. SSH accepts password logins. It would be right only for key-only authentication.
- D. The session did start and asked for a username. It would be right if the client could not connect at all.
What this question tests
It maps to 200-301 objective 4.10, Management access: Device management access Related ideas: vty, login local, troubleshooting.
The published topics under this objective, so you can check what you have covered:
- Console versus VTY
- Privilege levels
- Access restrictions
More from the archive
- 2026-11-06: On a Cisco device, which privilege level does the mode with the > prompt use by default, and which does the mode with the # prompt use?
- 2026-11-07: Two Cisco routers in one VRRP group both show Master after a switch ACL change between them, and hosts lose their gateway at random. Which traffic is the ACL most likely blocking?
- 2026-11-08: A single-area OSPF design has five Cisco routers, all Ethernet links, and a DR on every segment that needs one. The table lists the subnets. ``` Subnet Routers attached 10.1.12.0/24 Alpha, Bravo 10.1.23.0/24 Bravo, Charlie 10.1.34.0/24 Charlie, Delta 10.1.45.0/24 Delta, Echo 10.1.100.0/24 Alpha, Bravo, Echo 10.1.1.0/24 Alpha only 10.1.5.0/24 Echo only ``` How many router and network link-state advertisements does the link-state database hold?
- 2026-11-09: Access2 is a Cisco switch acting as a DHCP server. The Client-ID column holds a one-byte hardware type, 01 for Ethernet, followed by the client's MAC address. ``` Access2# show ip dhcp binding IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.10.123 0146.81df.f153.fe Jun 27 2026 01:47 PM Automatic 10.10.10.124 01e2.2e0b.baf5.4a Jul 30 2026 07:50 AM Automatic ``` Which MAC address belongs to the client that holds 10.10.10.124?
- 2026-11-11: An uplink failure leaves the Cisco switch Access2 unreachable over SSH from the operations center. A technician is on site with a laptop and a rollover cable. Which access method still works, and why?
- 2026-11-12: In HSRP, which state belongs to the router that forwards traffic for the virtual IP address?
- 2026-11-13: What kind of address mapping does static NAT create?
- 2026-11-14: Branch1 runs router ospf 1 and Hub2 runs router ospf 10. They share 10.1.30.0/24 in area 0 with default timers and matching network statements. Which statement is correct?
Start a daily session
Several questions at a time, aimed at your gaps.