200-301 practice question on DHCP relay, 2026-11-09
Archived question for 2026-11-09. Domain: IP Services. Objective 4.6: DHCP relay. Original SecLern question, written for practice.
Access2 is a Cisco switch acting as a DHCP server. The Client-ID column holds a one-byte hardware type, 01 for Ethernet, followed by the client's MAC address. ``` Access2# show ip dhcp binding IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.10.123 0146.81df.f153.fe Jun 27 2026 01:47 PM Automatic 10.10.10.124 01e2.2e0b.baf5.4a Jul 30 2026 07:50 AM Automatic ``` Which MAC address belongs to the client that holds 10.10.10.124?
Show the explanation
The Client-ID is the hardware type byte 01 followed by the MAC address. Removing 01 from 01e2.2e0b.baf5.4a leaves e2 2e 0b ba f5 4a, which regroups to e22e.0bba.f54a. The other row, 0146.81df.f153.fe, gives 4681.dff1.53fe.
Each option
- A. That keeps the type byte and loses the last byte. It would be right only if the Client-ID had no type byte and ended at baf5.
- B. That is the MAC address of the client at 10.10.10.123. It would be right for the first row.
- C (correct). Correct: Dropping the leading 01 type byte from 01e2.2e0b.baf5.4a leaves the six bytes e2 2e 0b ba f5 4a, regrouped as e22e.0bba.f54a.
- D. That moves the final byte to the front. It would be right only if the Client-ID listed the address in a different byte order.
What this question tests
It maps to 200-301 objective 4.6, DHCP relay: DHCP relay Related ideas: dhcp, show ip dhcp binding, client id.
The published topics under this objective, so you can check what you have covered:
- Broadcast boundary
- Relay configuration
- Verifying leases
More from the archive
- 2026-11-05: Which statement describes defense in depth?
- 2026-11-06: On a Cisco device, which privilege level does the mode with the > prompt use by default, and which does the mode with the # prompt use?
- 2026-11-07: Two Cisco routers in one VRRP group both show Master after a switch ACL change between them, and hosts lose their gateway at random. Which traffic is the ACL most likely blocking?
- 2026-11-08: A single-area OSPF design has five Cisco routers, all Ethernet links, and a DR on every segment that needs one. The table lists the subnets. ``` Subnet Routers attached 10.1.12.0/24 Alpha, Bravo 10.1.23.0/24 Bravo, Charlie 10.1.34.0/24 Charlie, Delta 10.1.45.0/24 Delta, Echo 10.1.100.0/24 Alpha, Bravo, Echo 10.1.1.0/24 Alpha only 10.1.5.0/24 Echo only ``` How many router and network link-state advertisements does the link-state database hold?
- 2026-11-10: The vty lines of Edge5, a Cisco router, are set with transport input ssh and login local, and the line password Vty-Pass-9 is configured. No username command exists. A technician's SSH session starts and asks for a username, but every login is rejected. Why?
- 2026-11-11: An uplink failure leaves the Cisco switch Access2 unreachable over SSH from the operations center. A technician is on site with a laptop and a rollover cable. Which access method still works, and why?
- 2026-11-12: In HSRP, which state belongs to the router that forwards traffic for the virtual IP address?
- 2026-11-13: What kind of address mapping does static NAT create?
Start a daily session
Several questions at a time, aimed at your gaps.