200-301 practice question on OSPFv2, 2026-11-08
Archived question for 2026-11-08. Domain: IP Connectivity. Objective 3.5: OSPFv2. Original SecLern question, written for practice.
A single-area OSPF design has five Cisco routers, all Ethernet links, and a DR on every segment that needs one. The table lists the subnets. ``` Subnet Routers attached 10.1.12.0/24 Alpha, Bravo 10.1.23.0/24 Bravo, Charlie 10.1.34.0/24 Charlie, Delta 10.1.45.0/24 Delta, Echo 10.1.100.0/24 Alpha, Bravo, Echo 10.1.1.0/24 Alpha only 10.1.5.0/24 Echo only ``` How many router and network link-state advertisements does the link-state database hold?
Show the explanation
In one area every router originates one Type 1 advertisement, so five. Type 2 advertisements come from the DR of each subnet with at least two routers: 10.1.12, 10.1.23, 10.1.34, 10.1.45 and 10.1.100, which is five.
Each option
- A. That counts the two subnets with only one router, which have no network advertisement. It would be right only if every subnet had a DR and a neighbor.
- B. That omits one of the five shared subnets. It would be right only if 10.1.100.0/24 had a single router.
- C. Routers, not subnets, originate router advertisements. It would be right only for a design with seven routers.
- D (correct). Correct: There is one router advertisement per router (5) and one network advertisement per subnet that has a DR and at least two routers: the five shared subnets, not the two single-router ones.
What this question tests
It maps to 200-301 objective 3.5, OSPFv2: Single-area OSPFv2 Related ideas: ospf lsdb, single area.
The published topics under this objective, so you can check what you have covered:
- Neighbour adjacencies
- DR and BDR election
- Router ID
More from the archive
- 2026-11-04: In the 6-bit DSCP field of an IP header, which per-hop behavior does codepoint 101110 select?
- 2026-11-05: Which statement describes defense in depth?
- 2026-11-06: On a Cisco device, which privilege level does the mode with the > prompt use by default, and which does the mode with the # prompt use?
- 2026-11-07: Two Cisco routers in one VRRP group both show Master after a switch ACL change between them, and hosts lose their gateway at random. Which traffic is the ACL most likely blocking?
- 2026-11-09: Access2 is a Cisco switch acting as a DHCP server. The Client-ID column holds a one-byte hardware type, 01 for Ethernet, followed by the client's MAC address. ``` Access2# show ip dhcp binding IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.10.123 0146.81df.f153.fe Jun 27 2026 01:47 PM Automatic 10.10.10.124 01e2.2e0b.baf5.4a Jul 30 2026 07:50 AM Automatic ``` Which MAC address belongs to the client that holds 10.10.10.124?
- 2026-11-10: The vty lines of Edge5, a Cisco router, are set with transport input ssh and login local, and the line password Vty-Pass-9 is configured. No username command exists. A technician's SSH session starts and asks for a username, but every login is rejected. Why?
- 2026-11-11: An uplink failure leaves the Cisco switch Access2 unreachable over SSH from the operations center. A technician is on site with a laptop and a rollover cable. Which access method still works, and why?
- 2026-11-12: In HSRP, which state belongs to the router that forwards traffic for the virtual IP address?
Start a daily session
Several questions at a time, aimed at your gaps.