200-301 practice question on Management access, 2026-11-06
Archived question for 2026-11-06. Domain: IP Services. Objective 4.10: Management access. Original SecLern question, written for practice.
On a Cisco device, which privilege level does the mode with the > prompt use by default, and which does the mode with the # prompt use?
Show the explanation
Privilege levels run from 0 to 15. By default user EXEC is level 1 and privileged EXEC is level 15, and these levels have nothing to do with syslog severities.
Each option
- A. Level 0 holds only a few commands such as logout. It would be right for a restricted lowest level, not for user EXEC.
- B (correct). Correct: Cisco documents user EXEC at level 1 and privileged EXEC at level 15 by default.
- C. Level 7 is an example custom level. It would be right only if an administrator moved commands there.
- D. User EXEC is not full privilege. It would be right for a user logged in with privilege 15.
What this question tests
It maps to 200-301 objective 4.10, Management access: Device management access Related ideas: privilege levels, user exec, privileged exec.
The published topics under this objective, so you can check what you have covered:
- Console versus VTY
- Privilege levels
- Access restrictions
More from the archive
- 2026-11-03: During business hours an engineer on a busy Cisco router enters router-id 2.2.2.2 under router ospf 1 and then clear ip ospf process. What happens?
- 2026-11-04: In the 6-bit DSCP field of an IP header, which per-hop behavior does codepoint 101110 select?
- 2026-11-05: Which statement describes defense in depth?
- 2026-11-07: Two Cisco routers in one VRRP group both show Master after a switch ACL change between them, and hosts lose their gateway at random. Which traffic is the ACL most likely blocking?
- 2026-11-08: A single-area OSPF design has five Cisco routers, all Ethernet links, and a DR on every segment that needs one. The table lists the subnets. ``` Subnet Routers attached 10.1.12.0/24 Alpha, Bravo 10.1.23.0/24 Bravo, Charlie 10.1.34.0/24 Charlie, Delta 10.1.45.0/24 Delta, Echo 10.1.100.0/24 Alpha, Bravo, Echo 10.1.1.0/24 Alpha only 10.1.5.0/24 Echo only ``` How many router and network link-state advertisements does the link-state database hold?
- 2026-11-09: Access2 is a Cisco switch acting as a DHCP server. The Client-ID column holds a one-byte hardware type, 01 for Ethernet, followed by the client's MAC address. ``` Access2# show ip dhcp binding IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.10.123 0146.81df.f153.fe Jun 27 2026 01:47 PM Automatic 10.10.10.124 01e2.2e0b.baf5.4a Jul 30 2026 07:50 AM Automatic ``` Which MAC address belongs to the client that holds 10.10.10.124?
- 2026-11-10: The vty lines of Edge5, a Cisco router, are set with transport input ssh and login local, and the line password Vty-Pass-9 is configured. No username command exists. A technician's SSH session starts and asks for a username, but every login is rejected. Why?
Start a daily session
Several questions at a time, aimed at your gaps.