Skip to content

All certifications

N10-009 practice question on OSI model, 2026-11-15

Archived question for 2026-11-15. Domain: Networking Concepts. Objective 1.1: OSI model. Original SecLern question, written for practice.

A repeater receives a weakened signal on one port, regenerates it and sends it out another port without reading any address in the data. At which OSI layer does the repeater operate?

Show the explanation

A device that only relays bits works at Layer 1, the Physical layer. The OSI model allows a physical connection to pass through intermediate systems that relay bit transmission within the Physical layer; such a device never looks at frames, packets or addresses.

Each option

  • A (correct). Correct: regenerating a signal bit by bit, with no address read, is relaying within the Physical layer.
  • B. Layer 2 devices read the hardware address in each frame to decide where to send it. It would be right if the device were a switch that forwards by destination MAC address.
  • C. Layer 3 devices read the IP header and choose a next hop. It would be right if the device were a router forwarding packets between networks.
  • D. Layer 4 devices make decisions on transport information such as TCP or UDP flows. It would be right if the device were a load balancer that distributes TCP connections.

What this question tests

It maps to N10-009 objective 1.1, OSI model: Explain concepts related to the Open Systems Interconnection (OSI) reference model. Related ideas: osi model, physical layer, repeater.

The published topics under this objective, so you can check what you have covered:

  • Layer 1 - Physical
  • Layer 2 - Data link
  • Layer 3 - Network
  • Layer 4 - Transport
  • Layer 5 - Session
  • Layer 6 - Presentation
  • Layer 7 - Application

More from the archive

Start a daily session

Several questions at a time, aimed at your gaps.