On this page
TL;DRWhat are performance-based questions (PBQs)?What do performance-based questions look like? Examples by typeWorked example: an A+ SOHO router taskWhich certification exams have performance-based questions?How many performance-based questions are on the exam?Does CISSP have performance-based questions?How are performance-based questions scored?How do you answer performance-based questions? A 6-step strategyBefore you click SubmitHow do you practice performance-based questions?Where to see real PBQ examplesPerformance-based questions vs. performance-based interview questions (and the VA)Our perspectivePractice with SecLernFAQDoes CompTIA Security+ SY0-701 have performance-based questions?How many performance-based questions are on the CCNA?Does CISSP have performance-based questions?Can you skip a PBQ and come back to it?Are PBQs worth more points than multiple-choice questions?What are performance-based interview questions?SourcesRecommendedA performance-based question (PBQ) is an exam item that asks you to complete a task in a simulated environment, such as dragging devices into a topology or configuring a SOHO router, instead of selecting one answer. CompTIA's A+, Network+, Security+ and CySA+ exams include them. ISC2's CISSP and AWS's SAA-C03 do not, and Cisco's CCNA doesn't use the PBQ label. No vendor publishes exactly how many you will get.
TL;DR
- A performance-based question (PBQ) is scored on a task you complete in a simulated environment, not on an option you select.
- CompTIA A+ (220-1201 and 220-1202), Network+ (N10-009) and Security+ (SY0-701) allow a maximum of 90 questions in 90 minutes each; CySA+ (CS0-003) allows a maximum of 85 questions in 165 minutes.
- ISC2 CISSP (100 to 150 adaptive questions, 3 hours) and AWS SAA-C03 (65 questions, 130 minutes) contain no hands-on items.
- Cisco CCNA 200-301 runs 120 minutes and publishes no question count; Cisco does not use the PBQ label.
- CompTIA does not publish how many PBQs appear on an exam or how items are weighted; every item counts toward one scaled pass/fail score.
- Budget time as if 3 to 6 items will be interactive, and never leave one blank, because an empty item earns nothing.
What are performance-based questions (PBQs)?
A performance-based question (PBQ) is an exam item that scores a task you complete, not an option you select.
A multiple-choice question asks you to recognize the right answer. A PBQ asks you to apply it: drag three devices into a topology, set an SSID and a WPA2-PSK passphrase on a simulated SOHO router, or type show ip interface brief into a console and read the output. On CompTIA exams you will meet four formats:
- Simulation. A simulated desktop, router or switch where you finish a configuration.
- Drag-and-drop. Place devices, order process steps, or match ports to services.
- Hotspot. Click the failing link on a diagram or the wrong VLAN in a table.
- Fill-in-the-blank or command entry. Type the command or value instead of picking it.
PBQ is CompTIA's label for these items. Cisco and AWS describe their question types differently, which is why search results for the phrase look inconsistent.

What do performance-based questions look like? Examples by type
A performance-based question looks like a small simulated workspace with a task list: a router settings page, a network diagram, or a command console where you make a change and then apply it. Typical items:
- Drag devices into a topology. A+ and Network+ items ask you to place a router, switch, firewall and access points to match a described network. Where you drop each device is the answer.
- Match ports and protocols to services. Drag 443/TCP onto HTTPS, 22/TCP onto SSH, 53 onto DNS, 3389/TCP onto RDP.
- Configure a simulated SOHO router. Set the SSID, choose WPA2-PSK, enter the passphrase, enable DHCP for a stated range, then apply.
- Order firewall or ACL rules. Arrange permit and deny rules so traffic matches the requirement list. Order changes the result.
- Sequence an incident response process. Drag containment, eradication and recovery steps into the order your policy requires.
- Type commands into a console. Run
ipconfig /allon a simulated Windows host orip addron Linux, then record the values the prompt asks for.
Worked example: an A+ SOHO router task
The prompt gives four requirements: a wireless network named CorpLab, WPA2-PSK with the passphrase shown, DHCP handing out 192.168.10.100 to 192.168.10.150, and the guest network off.
Read all four before you click. Decide the order: wireless, then security, then DHCP, then guest. Apply each setting in the simulated interface. Then verify: reopen the wireless tab and confirm the SSID and encryption, and reopen DHCP to check the pool.
Points go missing in two places. Setting WPA2-PSK but typing the passphrase wrong. Changing the DHCP pool without checking that the router's own LAN address sits outside it. The interface will feel unfamiliar on purpose: the item tests whether you can find a setting and apply it under time pressure, not whether you memorized a menu.
Which certification exams have performance-based questions?
CompTIA's A+, Network+, Security+ and CySA+ exams include performance-based questions. ISC2's CISSP and AWS's SAA-C03 do not, and Cisco's CCNA does not use CompTIA's PBQ label.
| Exam | Code | Performance-based items? | Questions | Time |
|---|---|---|---|---|
| CompTIA A+ Core 1 | 220-1201 | Yes | Maximum 90 | 90 minutes |
| CompTIA A+ Core 2 | 220-1202 | Yes | Maximum 90 | 90 minutes |
| CompTIA Network+ | N10-009 | Yes | Maximum 90 | 90 minutes |
| CompTIA Security+ | SY0-701 | Yes | Maximum 90 | 90 minutes |
| CompTIA CySA+ | CS0-003 (confirm the current version) | Yes | Maximum 85 | 165 minutes |
| Cisco CCNA | 200-301 | Interactive items, not labeled PBQs | Not published | 120 minutes |
| ISC2 CISSP | CISSP | No | 100 to 150, adaptive | 3 hours |
| AWS Solutions Architect Associate | SAA-C03 | No | 65 | 130 minutes |
Passing scores: A+ Core 1 675 and Core 2 700, Network+ 720, Security+ 750, CySA+ 750 on a 100-900 scale; AWS SAA-C03 720 on a 100-1000 scale; CISSP 700 out of 1000.
Those figures come from the vendors as of November 2026. CompTIA's Security+ page lists a maximum of 90 questions in 90 minutes and a passing score of 750 on a 100-900 scale, and the A+, Network+ and CySA+ pages list the question count, time limit and passing score for those exams. Cisco's CCNA exam topics page gives 120 minutes and the domain weights but no question count. AWS's SAA-C03 page lists 65 questions in 130 minutes, and ISC2's CISSP page describes the adaptive format.
Exam versions change. CompTIA has both SY0-701 and SY0-801 versions of Security+, so confirm the code on your booking against the vendor's page, or SecLern's free exam version comparison tool, before you rely on a figure in any blog post.
How many performance-based questions are on the exam?
No vendor publishes how many performance-based questions appear on a given exam. CompTIA publishes the maximum question count, the time limit and the passing score, and nothing about how many of those items are PBQs. Cisco does not publish a CCNA question count at all.
Candidate reports vary for a boring reason: exams draw from large randomized item pools across several exam forms, so one candidate's three and another's six can both be accurate on the same exam.
Instead of a number, budget time as if 3 to 6 items will be interactive, and don't assume they all arrive first. Treat the order as unknown and be ready for one at any point.
You cannot study for the right number. You study for the format.
Does CISSP have performance-based questions?
No. The CISSP has no performance-based questions. ISC2's CISSP page describes a computerized adaptive test of 100 to 150 multiple-choice questions in 3 hours, with a passing score of 700 out of 1000.
What makes CISSP different is adaptivity and breadth. The exam gets harder as you answer correctly, and it spans eight domains, with Security and Risk Management the largest at 16% and Asset Security and Software Development Security the smallest at 10% each. Four-option questions there often have several defensible answers, and the scored one is the answer a manager would pick.
So practice judgment, not console tasks: read a scenario, name the constraint (risk, budget, compliance, availability), then choose. Hands-on knowledge still pays off, because the management answer usually assumes you understand the technology underneath it.
How are performance-based questions scored?
Performance-based questions are scored as part of one scaled pass/fail result, not as a separate section with its own points. On CompTIA exams every item, PBQ or multiple choice, feeds the same scaled score, and CompTIA does not publish per-item weighting, so nobody outside the vendor can tell you a simulation is worth double a multiple-choice question.
Do not count on partial credit either. Vendors do not publish how partial completion is scored, so assume you must finish the whole task: a half-configured router cannot be relied on to earn anything.
A skipped PBQ earns nothing at all, which makes leaving one blank the worst option available.
On SecLern, PBQs are graded on whether the task was completed.
How do you answer performance-based questions? A 6-step strategy
Answer performance-based questions by reading the whole prompt before you click, doing the parts you know first, and flagging anything that stalls you for more than about two minutes.
The clock is the real constraint. Security+ gives 90 minutes for a maximum of 90 questions, so five PBQs at 10 minutes each would eat 50 of those minutes. Multiple-choice items are faster, and a simulation can swallow five minutes before you notice.
Never leave one blank. A configuration you half-remember beats an empty screen, because an empty screen cannot earn anything.
Before you click Submit
- Every requirement in the prompt has a matching setting you changed.
- No field is still on its default when the prompt asked for a change.
- Passphrases, addresses and names match the prompt character for character.
- You clicked Apply or Save on each tab, not just typed the value.
- You verified with a
showcommand or by reopening the tab.

How do you practice performance-based questions?
Practice in an interface, not in a book. Reading about configuring an ACL is not the skill the exam tests; finding the ACL tab, entering four rules in the right order and applying them is.
Five routes that work:
- Do labs on a simulated desktop. SecLern's hands-on labs in the browser run a simulated Windows, Linux and Cisco desktop with no VM and no cloud account.
- Work a timed set. Put six minutes on a clock per task and note which ones run over.
- Read the explanation for the right answer too. The rule you missed usually sits in the explanation of the correct option.
- Keep an error log. One line per missed task: what the prompt asked, what you did, which setting you missed. Re-do those tasks a week later.
- Start with free material. Free videos and free question sets are enough to learn the format; pay when you need graded labs and full timed simulations.
For CCNA, build the topology instead of reading the answer. Cisco Packet Tracer is free and covers the configuration reps; a graded lab platform adds the timer and the grading. Our virtual network labs guide covers the setup.
Where to see real PBQ examples
PBQ examples by exam breaks down item types per certification. For CompTIA formats, see our CompTIA PBQ practice guide.
Performance-based questions vs. performance-based interview questions (and the VA)
Performance-based interview questions are a different thing. In hiring, the phrase describes questions that ask you to explain what you actually did in a past situation, such as "tell me about a time you resolved a conflict on a project," and the interviewer scores the answer against a rubric. The U.S. Department of Veterans Affairs uses a structured Performance Based Interview process for some roles, which is where many of those searches start. This article covers the IT-exam meaning only: on a certification exam, a PBQ is a simulated task you complete, not a behavioral question you describe.
Our perspective
We built SecLern around one observation: definitions are rarely the sticking point on a CompTIA exam. The PBQ screen is, because a task you understand in theory still has to be completed in an interface you have never touched. Our opinion is that reading is the wrong first move for these items. Spend your first session doing, even badly: set the wrong ACL rule, break the router, then fix it. The trade-off is honest. Browser labs cannot reproduce every quirk of a vendor's exam interface, and no platform can tell you how many PBQs you will see. What labs do give you is the habit of reading a requirement list and completing it against a clock, which is the part you control.
Practice with SecLern
SecLern's CompTIA Security+ SY0-701 study page sits alongside A+, Network+, CySA+, Linux+ and Cisco CCNA paths, and the hands-on labs boot a simulated Windows, Linux or Cisco desktop with no VM or cloud account. If your exam is already booked, Exam Sprint is $29 once for 90 days of Pro-level access with no renewal; Pro itself is $15 a month or $99 a year with a 7-day trial, and every charge carries a 14-day refund.
FAQ
Does CompTIA Security+ SY0-701 have performance-based questions?
Yes. CompTIA's exam objectives for Security+ include performance-based questions alongside multiple-choice items. CompTIA's Security+ page lists a maximum of 90 questions in 90 minutes and a passing score of 750 on a 100-900 scale for SY0-701, but it does not say how many of those 90 are PBQs. CompTIA also has SY0-801 in circulation, so confirm which version your booking shows.
How many performance-based questions are on the CCNA?
Cisco does not publish a number. The CCNA 200-301 exam runs 120 minutes, and Cisco's exam topics page gives the domain weights but no question count and no item-type breakdown. Cisco does not publish an item-type split either, so plan for several interactive tasks and practice building topologies rather than counting them.
Does CISSP have performance-based questions?
No. The CISSP is a computerized adaptive multiple-choice test of 100 to 150 questions in 3 hours, with a passing score of 700 out of 1000, according to ISC2's CISSP page. There are no simulated tasks. What you practice instead is judgment between four defensible answers across eight domains, with Security and Risk Management the largest at 16%.
Can you skip a PBQ and come back to it?
Usually yes. On CompTIA's exam interface you can flag an item and return to it from the review screen before you end the test, and the clock keeps running. Flag anything that stalls you for more than about two minutes, then finish the multiple-choice questions, which are faster. Never leave one blank if you can enter something, because an empty item earns nothing.
Are PBQs worth more points than multiple-choice questions?
The vendors do not publish per-item scoring, so nobody outside CompTIA can say. CompTIA publishes a scaled passing score, 750 on a 100-900 scale for Security+, but not how individual items are weighted. Treat PBQs as time-expensive, not as confirmed to be worth more, and do not spend 20 minutes polishing one simulation.
What are performance-based interview questions?
In hiring, a performance-based interview question asks you to describe your own past behavior, such as "tell me about a time you handled a disagreement," and the interviewer scores the answer against a rubric. The U.S. Department of Veterans Affairs uses a structured Performance Based Interview process for some roles. It has nothing to do with the PBQs on a CompTIA exam, which are simulated tasks.
Sources
- CompTIA Security+ certification page (exam details)
- CompTIA A+ certification page (exam details)
- CompTIA Network+ certification page (exam details)
- CompTIA CySA+ certification page (exam details)
- Cisco CCNA 200-301 exam topics
- ISC2 CISSP certification page
- AWS Certified Solutions Architect - Associate exam page
Recommended
- PBQ examples by exam: see the item types before exam day
- How to answer performance-based questions: a timing strategy
- CompTIA PBQ Practice: How to Prepare for Performance-Based Questions
- Self-Study Certifications: How to Pass Without a Course
- AZ-900 Practice Test: How to Use One to Pass Azure Fundamentals
