# Network+ Labs: 10 Hands-On Labs to Practice (2026)

_Network+ labs mapped to N10-009 domains: 10 free and paid hands-on options, what to do in each, a free home lab build and a four-week study plan._

Published 2026-11-17 · updated 2026-11-17 · https://seclern.com/blog/network-plus-labs

Network+ labs are hands-on exercises where you build, configure and break small networks, and they are the closest practice to the performance-based questions on the N10-009 exam. They do not have to cost anything: Cisco Packet Tracer, GNS3, Wireshark and VirtualBox are free, and browser-based labs need no VM or cloud account. A workable plan is two to three labs per N10-009 domain over four weeks, weighted toward Network Troubleshooting (24%) and Networking Concepts (23%).

## TL;DR
- Network+ labs are build, configure and break exercises; the N10-009 exam also includes performance-based questions where you complete a task in a simulated environment.
- Cisco Packet Tracer is free with a Cisco Networking Academy account and is the fastest install-based start; GNS3, EVE-NG Community Edition, Wireshark and VirtualBox are free downloads too.
- CompTIA's Network+ page lists a maximum of 90 questions in 90 minutes and a passing score of 720 on a 100-900 scale.
- Network Troubleshooting (24%) and Networking Concepts (23%) are the two heaviest domains, so break/fix drills and subnetting deserve the most lab hours.
- A four-week plan of 4 to 6 lab hours per week covers all five N10-009 domains before a booked exam date.
- One simulator, one packet tool and a question bank beat a folder full of half-finished installs.

## What are Network+ labs?

A Network+ lab is a hands-on exercise where you build, configure or troubleshoot a small network, then prove it works or find out why it does not. You trunk two VLANs, add a static route, stand up DHCP and DNS on a Linux box, write an ACL, or capture packets until a DNS failure shows itself. A lab ends with evidence: a `ping` that succeeds, a `show` command that proves the trunk is up, or a capture that shows the wrong gateway answering. It is not a video and it is not a quiz.

**Why they matter.** The N10-009 objectives are written as tasks, not trivia, and [CompTIA's published objectives](https://www.comptia.org/training/resources/exam-objectives) list the domain weights you can plan around: Network Troubleshooting 24%, Networking Concepts 23%, Network Implementation 20%, Network Operations 19%, Network Security 14%. Each of those domains has a lab you can run on a laptop, and the domain table below maps them.

**A note on the keyword.** This page covers CompTIA Network+ hands-on labs. It is not about a company named Network Labs, including firms in Bangalore, India, that use the name, or a hospital system's internal network lab pages.

What follows: ten labs, a free home lab you can build in an evening, and a four-week plan weighted to the two heaviest domains.

## Does the Network+ exam have labs?

Yes. CompTIA Network+ N10-009 includes performance-based questions (PBQs), where you complete a task in a simulated environment instead of choosing an answer. The rest of the exam is multiple choice, and CompTIA sells its own [CertMaster Labs](https://www.comptia.org/training) for the hands-on side.

The format, per [CompTIA's Network+ page](https://www.comptia.org/certifications/network): a maximum of 90 questions in 90 minutes, with a passing score of 720 on a 100-900 scale. CompTIA does not publish how many of those questions are PBQs, so treat an exact PBQ count you see quoted as an estimate. N10-009 is the version this article covers; check that page before you book in case a newer version has launched.

The objectives explain why labs pay off. The same opening repeats across every domain in the [N10-009 objectives](https://www.comptia.org/training/resources/exam-objectives): "Given a scenario, ...". A candidate who has actually broken a trunk reads those items faster than one who memorized a port list, and both still need 22 SSH, 53 DNS, 67/68 DHCP, 389 LDAP, 443 HTTPS and 3389 RDP.

See [PBQ examples by exam](https://seclern.com/pbq-examples) to see the format before you build anything.

## Best Network+ labs at a glance

Ten Network+ labs are worth your time: seven free, three paid, and only the two emulators ask for an evening of setup before your first lab.

| Lab | Cost | Best for | Setup effort | Runs in a browser |
|---|---|---|---|---|
| Cisco Packet Tracer | Free with a Cisco Networking Academy account | VLANs, trunks, routing and ACL drills | Low: one download | No, desktop app |
| GNS3 | Free, open source | Real router and OS images, larger topologies | High: you supply licensed device images | No, desktop app |
| EVE-NG Community Edition | Free edition alongside paid editions | Big topologies from a web UI | High: images plus a well-resourced VM or server | Yes, web UI |
| Wireshark | Free, open source | Reading packets: DNS, DHCP, ARP, TCP | Low: one install | No, desktop app |
| VirtualBox plus a Linux VM and a Windows evaluation VM | Free | Services and hosts: DNS, DHCP, firewall rules | Medium: two VMs, one internal network | No, desktop app |
| Cisco DevNet Sandbox | Free with an account and a reservation | Running `show` commands on real Cisco gear | Low: book a slot, then connect | Yes |
| SecLern labs and PBQs | Free tier, then Pro or Exam Sprint | N10-009 labs and PBQs graded on task completion | None: no VM or cloud account | Yes |
| Boson NetSim | Paid | Guided Cisco labs with instructions | Low | No, desktop app |
| Cisco Modeling Labs | Paid subscription | Real Cisco images without the GNS3 image hunt | Medium | Yes, web UI |
| CompTIA CertMaster Labs | Paid | Official labs mapped to the objectives | Low | Yes |

Two shortcuts from the table: the fastest zero-install start is a browser lab or a DevNet Sandbox reservation, and the best free install-based start is Packet Tracer, because it gives you VLANs and ACLs on the first evening with no router images to find.

## Free Network+ labs you can start today

You can run seven free Network+ labs today, and only GNS3 and EVE-NG ask for an evening of image hunting first.

1. **Cisco Packet Tracer.** Free with a [Cisco Networking Academy account](https://www.netacad.com/courses/packet-tracer). First exercise: two switches, four PCs, VLAN 10 and VLAN 20, a trunk and inter-VLAN routing. Then shut the trunk and fix it. Setup: one download.
2. **GNS3.** [Free and open-source network simulation](https://www.gns3.com/) that runs on your own machine. First exercise: three routers in OSPF, then shut an interface and read the neighbor table as the adjacency drops. Setup: an evening, mostly sourcing legal images.
3. **EVE-NG Community Edition.** A free edition of a platform that also sells paid editions, per [EVE-NG](https://www.eve-ng.net/). First exercise: rebuild the GNS3 OSPF topology and note what the web console makes easier. Setup: high, because it wants images and RAM.
4. **Wireshark.** [Free, open-source packet analysis](https://www.wireshark.org/). First exercise: capture a `ping` and a DNS lookup, filter on `dns`, follow a TCP stream, then find a failed ARP. Setup: one install.
5. **VirtualBox with a Linux VM and a Windows evaluation VM.** [Free, open-source virtualization](https://www.virtualbox.org/). First exercise: static IPs on an internal network, DHCP and DNS on the Linux box, one firewall rule, then test with `ping` and `traceroute`. Setup: about two hours.
6. **Cisco DevNet Sandbox.** [Free, reservable environments on real Cisco platforms](https://developer.cisco.com/sandbox/). First exercise: run `show ip interface brief` and `show running-config` on an IOS XE sandbox and compare with your Packet Tracer config. Setup: a free account and a booking.
7. **SecLern labs and PBQs.** The free tier includes the first module of each path, 30 questions a day and 3 labs and PBQs, no card. Labs run in a [simulated Windows, Linux and Cisco desktop](https://seclern.com/hands-on-labs), so there is no VM or cloud account to build. Pro or Exam Sprint unlocks every lab and PBQ.

Community GNS3 and EVE-NG topologies are shared on GitHub, so search there before you build one from scratch.

## Paid Network+ labs and simulators worth the money

Three paid options are worth considering, and each one earns its price only if you actually finish the labs inside it.

1. **Boson NetSim.** A paid simulator built around guided Cisco lab exercises, per [Boson's site](https://www.boson.com/). Pay if you want instructions and feedback rather than a blank canvas, and if you are heading toward CCNA or CCNP, because NetSim follows Cisco exam topics rather than the N10-009 objectives. Skip it if Packet Tracer already covers what you need.
2. **Cisco Modeling Labs.** Cisco's own virtual networking lab platform, sold as a subscription, according to [Cisco's Modeling Labs page](https://developer.cisco.com/modeling-labs/). Pay if you want real Cisco images with far less setup than GNS3. Skip it if Packet Tracer already covers the objectives you are weak on.
3. **CompTIA CertMaster Labs.** Official CompTIA labs tied to the objectives, listed under [CompTIA Training](https://www.comptia.org/training). Pay if you want someone else to have decided which labs matter and in what order, and if you would rather follow the exam publisher's own sequencing than build your own.

The honest verdict: pay for one thing only, either guided labs or a simulator you will genuinely finish, and put the rest of the budget into practice questions and a buffer for a second attempt. A paid platform you open twice costs more than a free one you finish.

## Which lab should you use for each N10-009 domain?

The right lab for each N10-009 domain is the one that makes you do the thing that domain tests, weighted by how much of the exam it covers.

| Domain and weight | Lab skill to practice | Best free lab | Paid upgrade |
|---|---|---|---|
| Networking Concepts (23%) | OSI and TCP/IP models, subnetting and CIDR, ports and protocols, DHCP and DNS concepts | Two VMs on static IPs, plus a subnet calculator | CompTIA CertMaster Labs |
| Network Implementation (20%) | VLANs, trunks, static and dynamic routing, wireless configuration | Packet Tracer, or GNS3 for real images | Cisco Modeling Labs |
| Network Operations (19%) | DHCP, DNS and NTP services, monitoring, configuration backup and documentation | Wireshark plus a Linux VM | CompTIA CertMaster Labs |
| Network Security (14%) | ACLs, port security, VPN concepts, wireless security | Packet Tracer ACL and port-security labs | Boson NetSim |
| Network Troubleshooting (24%) | Break/fix drills: wrong VLAN, bad mask, DNS failure, duplex mismatch | Wireshark plus Packet Tracer | Boson NetSim |

Keep two references open while you work: the [subnet calculator](https://seclern.com/tools/subnet) for anything with a mask, and the ports cheat sheet for 22, 53, 67/68, 389, 443 and 3389. Weights come from [CompTIA's N10-009 objectives](https://www.comptia.org/training/resources/exam-objectives).

The weights tell you where to spend lab hours, not the order to study. A domain worth 14% can still sink a score if a PBQ lands on it, so run at least one lab from every row before exam day and write down what broke.

## How do you build a free Network+ home lab?

You can build a free Network+ home lab on an ordinary laptop in about an evening: 8 GB of RAM works and 16 GB is comfortable for two virtual machines at once. The goal is not a data center. It is a repeatable place where you can break something small and fix it.

1. **Install VirtualBox and make one folder.** Create a dedicated folder for topology files, captures and notes, so a rebuild starts from a known place.
2. **Install Packet Tracer and save every finished file.** Name each `.pkt` by what it proves: `vlan-trunk-broken.pkt`, `ospf-two-routers.pkt`. You will rebuild them from memory later.
3. **Build two VMs on an internal network.** A lightweight Linux VM and a Windows evaluation VM, both on an internal or host-only network so traffic stays on your machine. Give them static IPs before you add any service.
4. **Install Wireshark on the host and capture between the VMs.** Capture the traffic from a `ping` and from a DNS query, then read the difference in the packet list.
5. **Write one task per session and log it.** Examples: "make VLAN 20 reach the router", "break DNS and fix it". Record what you did, what failed and the command that proved the fix.
6. **Rebuild one old topology from memory each week.** Then open the saved file and compare configurations line by line. This is the step most people skip, and it is the one that moves knowledge into long-term memory, as described in [how to retain technical knowledge](https://blog.seclern.com/blog/how-to-retain-technical-knowledge).

If you want a deeper comparison of simulation and virtualization options before you commit, see [virtual network labs](https://blog.seclern.com/blog/virtual-network-labs).

## What should a 4-week Network+ lab plan look like?

A four-week Network+ lab plan works out to roughly 4 to 6 lab hours per week, allocated by domain weight rather than in the order the objectives are printed.

| Week | Focus and weight | Labs to run | Hours |
|---|---|---|---|
| Week 1 | Networking Concepts (23%) | Subnetting drills, ports and protocols, an OSI walkthrough, two VMs on static IPs | 4 to 5 |
| Week 2 | Network Implementation (20%) | Packet Tracer VLANs and trunks, static and OSPF routing, wireless basics | 4 to 5 |
| Week 3 | Network Operations (19%) and Network Security (14%) | DHCP, DNS and NTP services, Wireshark captures, ACLs and port security | 4 to 5 |
| Week 4 | Network Troubleshooting (24%) | Timed break/fix drills, PBQ practice, one full timed exam simulation | 5 to 6 |

Week 4 is where the exam gets decided. Practice PBQs against the clock, and read [CompTIA PBQ practice](https://blog.seclern.com/blog/comptia-pbq-practice) before the first timed run so you know what the format does to your pacing.

Book the exam only when your practice scores are steady across all five domains, not after one good day. Do not trust a voucher price quoted in any article, including this one: prices change by region and over time, so check [CompTIA's Network+ page](https://www.comptia.org/certifications/network) for the current figure. The certification is valid for three years and renews through Continuing Education, per [CompTIA's CE page](https://www.comptia.org/continuing-education).

## What do Reddit and working techs recommend for Network+ labs?

The advice that comes up most often on r/CompTIA and r/networking is consistent: start with Packet Tracer, do not buy physical switches for Network+, and move to GNS3 or EVE-NG only when you need real images. Pair every lab block with practice questions, because the exam asks you to choose and diagnose, not to build.

**Check the version of any guide you follow.** Plenty of lab walkthroughs still target N10-008; the objectives were reorganized and the domain weights differ. Confirm the version on [CompTIA's objectives page](https://www.comptia.org/training/resources/exam-objectives) before you spend a weekend following an old guide.

The four mistakes that waste the most time:

- **Collecting tools instead of finishing labs.** Five installed simulators and zero completed topologies is a common end state. Pick one and finish ten small labs.
- **Watching lab videos without doing them.** Watching someone configure a trunk feels like practice and is not. Your hands need the repetitions.
- **Skipping subnetting.** It shows up in Networking Concepts and it slows you down inside troubleshooting items. Ten minutes a day beats a weekend cram.
- **Never practicing under a timer.** The PBQ format rewards people who read the task, plan, and execute without exploring every menu.

The verdict: one simulator, one packet tool and a question bank beat a folder full of half-finished installs. Finish small labs on a schedule and log what broke each time.

## Our perspective

We built SecLern around a plain observation: people finish lab videos and still cannot build the topology from a blank screen. So our Network+ labs are graded on whether the task was completed, not on whether you watched. Here is the honest trade-off. A simulator such as Packet Tracer or GNS3 gives you a blank canvas and real device quirks, which is exactly what a troubleshooting domain worth 24% rewards, but it also hands you setup work you may never finish. A guided lab gives you a checklist, a score and fewer surprises. Do both if you have eight weeks. If your exam is in three, take the guided route first and spend the saved evenings on subnetting drills.

## Practice with SecLern

SecLern's [CompTIA Network+ (N10-009) study page](https://seclern.com/certs/comptia-network-n10-009) pairs every domain with browser-based labs and PBQs that run in a simulated Windows, Linux and Cisco desktop, so you can finish a lab in a coffee break instead of hunting for router images. Missed questions become notes and drills, timed exam simulations give you a readiness grade, and Ping gives hints instead of answers. The free tier includes the first module of each path, 30 questions a day and 3 labs and PBQs, no card. Pro is $15 a month or $99 a year with a 7-day trial; cancel before day 7 and you are not charged. Exam Sprint is $29 once for 90 days with no renewal.

## FAQ

### Does Network+ have labs?

Yes, in two senses. CompTIA Network+ N10-009 includes performance-based questions, where you complete a task in a simulated environment instead of choosing an answer. Separately, you can run your own hands-on labs in Packet Tracer, GNS3, Wireshark or a browser-based platform, and those are what build the skills the PBQs check.

### Are Network+ labs free?

Mostly, yes. Packet Tracer is free with a Cisco Networking Academy account, and GNS3, EVE-NG Community Edition, Wireshark and VirtualBox are free to download. Cisco DevNet Sandbox offers free reservations. Paid options are Boson NetSim, Cisco Modeling Labs and CompTIA CertMaster Labs. A free tier of a browser-based platform is usually enough to test whether guided labs suit you before spending anything.

### What is the best network lab simulator for Network+?

Cisco Packet Tracer is the best first simulator for most Network+ candidates: it is free, needs no router images, and covers VLANs, trunks, routing and ACLs. GNS3 or EVE-NG make sense once you want real device images or larger topologies and can spare the setup time. For reading traffic rather than configuring devices, Wireshark beats both.

### What is Skills Network Labs?

Skills Network Labs is a browser-based lab platform from IBM Skills Network, formerly Cognitive Class, used alongside IBM's free courses for hands-on data and cloud exercises. It is not a CompTIA Network+ lab product and does not map to the N10-009 objectives, so it will not replace Packet Tracer, GNS3 or a Network+ lab path if the certification is your goal.

### Do I need real Cisco hardware to practice Network+ labs?

No. Every N10-009 objective can be practiced on a laptop: Packet Tracer for switching and routing, two virtual machines for DHCP, DNS and firewall work, and Wireshark for packet analysis. Physical switches and routers add cost, cabling and noise, and Network+ does not test device-specific command line skills the way Cisco CCNA 200-301 does.

### Does Network+ expire?

Yes. CompTIA certifications are valid for three years and are renewed through Continuing Education, according to [CompTIA's continuing education page](https://www.comptia.org/continuing-education). You collect CE units through training, higher-level certifications, teaching or industry activity. Check CompTIA's page for the current requirements and fees rather than relying on a figure from an article.

## Sources

- [CompTIA Network+ certification page](https://www.comptia.org/certifications/network)
- [CompTIA Network+ (N10-009) exam objectives](https://www.comptia.org/training/resources/exam-objectives)
- [CompTIA Training (CertMaster)](https://www.comptia.org/training)
- [Cisco Networking Academy, Packet Tracer](https://www.netacad.com/courses/packet-tracer)
- [GNS3 official site](https://www.gns3.com/)
- [EVE-NG official site](https://www.eve-ng.net/)
- [Wireshark official site](https://www.wireshark.org/)
- [Oracle VirtualBox official site](https://www.virtualbox.org/)
- [Cisco DevNet Sandbox](https://developer.cisco.com/sandbox/)
- [Cisco Modeling Labs](https://developer.cisco.com/modeling-labs/)
